MS400 Four-in-One
Toxic and Harmful Gas Detector
OVERVIEW
MS400 Series Gas Detector is up to 4 potential atmospheric hazards including oxygen, combustible and toxic gases, the types of gases for detection are more than 500 types, MS400 is unparalleled in its versatility, capability, and overall value.
Its adopted water-resistant line of portable gas detectors has transformed the market with its matchless array of features.
Continuously monitoring and displaying concentrations of up to 4 gases, the compact and lightweight MS400 was designed and engineered with an extensive host of applications in mind.
FEATURES & BENEFITS
1. Specially Designed for Use With Its Internal Pump, Optimized for Your Requirements
The MS400 is equipped with a very powerful internal pump.
It can be connected with hoses of up to 45 meters in length.
This means the pump is only operated when you actually need it. That saves energy, reduces wear and tear, and thereby extends the lifespan of the pump.
2. Compact Design, Easy to Use
Handy and durable, the MS400 is intuitive to operate single-handedly using three function keys. The easy-to-read color display clearly lays out all the information for you. Thanks to its compact and robust construction, the device can withstand even the harshest conditions.
3. Large Data Storage Management, Release, and Documentation In No Time
Standard configuration is the data storage capacity for 100, 000 entries.
Real-time storage and fixed time storage are supported, or only the data of the alarm concentration will be stored.
It is supported to use the localhost to view, delete data, and upload the data via USB interface to the computer for data analysis or printing.RS485 communication is an optional configuration.
4. Clear signaling Design
The signal system of the MS400 is based on a clear color code: sound & light alarm, vibration alarm, display screen visual alarm. These are also documented in the data logger.
5. Economical Calibration Management
The deviation of the concentration which was detected by the instrument from the standard gas concentration can be corrected by calibrating the concentration or changing the display coefficients.
SPECIFICATION
| Gases to be detected | Arbitrary combination of 1 ~ 4 types of gases such as toxic gases, oxygen gas, carbon dioxide, inflammable and explosive gases, TVOC, and so on. Optional configuration: temperature and humidity measurements. |
| Detection range | 0 ~ 1, 10, 100, 1000, 5000, 50000, 100000ppm, 200 mg/L, 100%LEL, 20%, 50%, 100%Vol, can be selected; and other ranges can be customized. |
| Resolution | 0.01ppm or 0.001ppm (0 ~ 10 ppm); 0.01ppm (0 ~ 100 ppm), 0.1ppm (0 ~ 1000 ppm), 1ppm (0 ~ 10000 ppm or more), 0.01 mg/l (0 ~ 200 mg/l), 0.1% LEL, 0.01%Vol, 0.001% Vol |
| Sensor service life | Electrochemical principle: 2 ~ 3 years; Oxygen gas: 2 years or 6 years can be selected; infrared principle: 5 ~ 10 years; catalytic combustion: 3 years; thermal conductivity: 5 years; PID photoionization: 2 ~ 3 years. |
| Maximum allowable error | ≤±3% F.S (higher precision levels can be customized) |
| Linearity | ≤±2% | Linearity | ≤±2% | Linearity | ≤±2% |
| Response time | T90≤30 seconds | Recovery time | ≤30 seconds |
| Temperature and humidity measurement | Optional configuration: temperature at -40 ℃ ~ + 70 ℃, accuracy level at 0.5 ℃; humidity at 0 ~ 100% RH, precision level at 3 % RH |
| Power supply | 3.6VDC, 4500mA high capacity rechargeable polymer battery |
| Display mode | 2.31-inch high-definition color screen |
| Communication interface | USB (charging and communication), optional: RS485 communication interface |
| Data storage | Standard configuration is the data storage capacity for 100, 000 entries |
| Protection level | IP65 |
| Explosion-proof type | Intrinsically safe type |
| Explosion-proof mark | Exia II CT6 |
| Exterior dimensions | 160×70×28mm |
| Weight | 300 g |
| Standard accessories | Manual, qualification certificate, warranty card, USB charger (including the data cable), high-grade aluminum instrument case, belt clip, humidity dust filter |
| Optional items | Temperature and humidity measurement function, 1.2 m retractable sampling handle (1-10 meter hose and the standard length is 1 meter), 0.4-meter stainless steel sampling handle (with a dust filter, not retractable), high-temperature sampling and cooling filter handle, high-temperature humidity pretreatment system, multiple humidity dust filter, hanging rope, CD-ROM (upper-level computer communication software) |
APPLICATION
All the cases require the portable rapid detection of gas concentrations such as petroleum, chemical, pharmaceutical, environmental protection, combustion gas distribution, warehousing, smoke gas analysis, air governance, and so on.
Product Tags:
|
|
4 In 1 Natural Detect Portable Multi Gas Detector For Toxic Gases And Combustible Gas Images
|
